Autel MaxiSys ADAS Calibration Tool
Advanced Driver Assistance System (ADAS) is becoming standard equipment on today’s new vehicles. These systems are designed to assist drivers to prevent collisions by displaying alerts, providing camera images or by taking instantaneous control of the vehicle. The Autel MaxiSys ADAS provides the original complete diagnostic functionality, comprehensive and precise ADAS calibration. With MaxiSys calibration tools and accurate software, Autel MaxiSys ADAS is an ideal calibration tool for collision repair, glass replacement and repair shops.
Click the link to download the specifications of tablet, calibration frame, and pattern board.
MaxiSys ADAS Functions
Adaptive Cruise Control (ACC)
Control system to automatically adjust vehicle speed to maintain a safe distance from vehicles ahead. Control is based on sensor information from on-board sensors.
Night Vision (NV)
Uses a thermographic camera to increase a driver’s perception and seeing distance in darkness or poor weather beyond the reach of the vehicle’s headlights.
Blind Spot Detection (BSD)
Vehicle-based sensor function that detects other vehicles located to the driver’s side and vehicle rear, then post a proximity warning.
Lane Departure Warning (LDW)
Warns driver when vehicle begins to move out of freeway lane. Designed to minimize causes collisions: driver error, distractions and drowsiness.
Around View Monitoring (AVM)
Provides a virtual 360-degree scene of the car in bird’s-eye view. It assists drivers to park more easily by better understanding the vehicle’s surroundings.
Rear Collision Warning (RCW)
Braking at standstill to avoid rear-end collisions. Alert when engine started and cannot turn off. Warn driver of vehicle approach from behind by rapid signal flash.
HUD - Head Up Display (HUD)
Vehicle speedometer or navigation details projected on the windshield as transparent display so the driver does not need to look away from the road while driving.
MaxiSys ADAS Potential Usage
GLASS REPLACEMENT
COLLISION REPAIR
SPECIALTY
WHEEL ALIGNMENT
MaxiSys ADAS Calibration Frame
Adjustable Calibration Frame and Tools
The Autel calibration frame provides compatible use with vehicle leveling lifts by offering a taller than average extended adjustable height. Easily and precisely adjust calibration frame crossbar during leveling process to ensure vehicle is correctly centered and parallel while facing targets for calibration.
Frame packages do not include software to perform ADAS Calibration. Please order MaxiSys ADAS Tablet or software upgrade separately.
Flexible
Easily Interchangeable Calibration Components with Power Adjustable Frame
Precise
Fine-tuning Hand Knob and Laser Positioning for Millimeter Ruler
Adjustable
Even on an uneven floor, the calibration frame can be easily raised or lowered to be level with the vehicle
MaxiSys ADAS Calibration Tool Kits
The MaxiSys ADAS provide diverse tools that are easily assembled to complete calibrations for the multi-function vehicle systems: Adaptive Cruise Control, Lane Departure Warning, Night Vision System, Blind Spot Detection, Around View Monitoring, and Rear Collision Warning.
For information of the LDW Calibration Package and the Complete Package, click the link to download the Package Comparison.
Adaptive Cruise Control (ACC)
Reflector
CSC0602/01
Positions the calibrate radar for VW, Porsche, BMW, Nissan, Infiniti, Hyundai and KIA vehicles.
Mini Reflector
Together with the laser on the calibration frame, adjusts the radar to be vertical to the ground.
Corner Reflector
CSC0802/01
Calibrates radar for Honda, Toyota, Hyundai, and KIA vehicles by attaching to the Calibrator Stand
Radar Calibration Plate
CSC0602/02
Calibrates the Continental radar for Nissan and Infiniti vehicles by attaching to the sliding board on the calibration frame
Radar Calibration Plate
AUTEL-CSC0602/08
Calibrates radar for Volkswagen vehicles by attaching to calibration frame.
Radar Calibration Plate
CSC0802/03
Calibrates radar for Nissan vehicles by attaching to the calibration stand
Lane Departure Warning (LDW)
Pattern Board & Target Board Holder
Paste different patterns for lane departure warning systems calibration of different vehicles.
VW LDW Pattern
CSC0601/01
Target Board Holder
CSC0600/02
Honda/Acura LDW II
CSC0601/08-L
Honda/Acura LDW II
CSC0601/08-R
Honda LDW I
CSC0601/05
Toyota/Lexus LDW I
CSC0601/11
Toyota/Lexus LDW II
CSC0601/15
Hyundai/KIA LDW II
CSC0601/09
Mercedes-Benz LDW
CSC0601/02
Nissan LDW I
CSC0601/03-L
Nissan LDW I
CSC0601/03-R
Nissan/Infiniti/Renault LDW II
CSC0601/06-L
Nissan/Infiniti/Renault LDW II
CSC0601/06-R
Nissan LDW I
CSC0601/03
Hyundai/KIA LDW I
CSC0601/07
Nissan LDW III
CSC0601/04-L
Nissan LDW III
CSC0601/04-R
Mazda LDW I
CSC0601/12
Mazda LDW II
CSC0601/13-L
Mazda LDW II
CSC0601/13-R
Mercedes LDW II
CSC0601/19
Mitsubishi LDW
CSC0601/22-L
Mitsubishi LDW
CSC0601/22-R
Canvas/Subaru LDW I
CSC0601/14
Hyundai/Kia LDW
CSC0701/23
Alfa Romeo/Geely-LKS
CSC0601/10
Night Vision (NV)
NV Calibrator (Benz)
CSC0803/01
Calibrates night vision system of Benz vehicles.
NV Calibrator (VW, Audi, GM, and Porsche, etc.)
CSC0603/01
Calibrates night vision system of VW, GM and Porsche vehicles by attaching to the sliding board.
Around View Monitoring (AVM)
AMERICAN
GM / CHEVY / CADILLAC / BUICK / JEEP / CHRYSLER / DODGE / FORD / LINCOLN
Ford-AVM
CSC1004/05-L
Cadillac-AVM
CSC1004/06
ASIAN
NISSAN / ACURA / HONDA / TOYOTA / LEXUS / INFINITI / KIA / MAZDA / HYUNDAI / SUBARU
Honda-AVM
CSC1004/03
Honda-AVM
CSC1004/02
Mitsubishi-AVM
CSC1004/09
Toyota-AVM
CSC1004/10
EUROPEAN
BENZ / PORSCHE / AUDI / VW / BMW / MINI / FIAT / VOLVO / JAGUAR / MASERATI
Porsche-AVM
CSC1004/07
VW, Porsche, etc.-AVM
CSC1004/01
VW-RCW/AVM
CSC0806/01
VW-AVM
CSC0804/01
PSA-AVM
CSC1004/08
Blind Spot Detection (BSD)
Radar Calibration Box
CSC0605/01
Calibrates blind spot detection system of VW, Porsche and Mazda vehicles by attaching to the sliding board on the crossbar of the calibration frame.
Corner Reflector
CSC0802/01
Calibrates radar for Honda, Toyota, Hyundai, and KIA vehicles by attaching to the Calibrator Stand.
Camera Calibration Plate
CSC0805/02
Calibrates Lane Watch for Honda vehicles by attaching to the calibration stand.
Rear Collision Warning (RCW)
Mercedes-Benz-RCW
CSC1006/01
Nissan-RCW
CSC1006/03
Nissan-RCW
CSC1006/04
Nissan-RCW
CSC1006/05
Assistance Tools
Laser
CSC0500/04
Identifies whether the vehicle and the pattern are on the same central axis.
Calibration Stand
CSC0802
Holds calibration plates for Nissan and Honda vehicles.
MaxiSys ADAS Software
Precise MaxiSys ADAS Calibration Software
Based on the powerful MaxiSys platform, Autel presents the MaxiSys ADAS with the original complete diagnostic functions and comprehensive ADAS calibration. Combined with the service manual, the procedures are presented with graphic instruction. The MaxiSys tablet has the best possible OE-level diagnostic coverage to offer complete ADAS and diagnostic solutions for smarter repair and calibration.
Please order the calibration frame packages separately.
